A breakwater is constructed some distance away from the coast or built with one end linked to the coast. Breakwaters may be either fixed or floating: the choice depends on normal water depth and tidal range. A breakwater structure is designed to absorb the energy of the waves that hit it. This is done either by using mass or by using a revetment slope (e.g. with rock or concrete armour units).
Caisson breakwaters typically have vertical sides and are usually used where it is desirable to berth one or more vessels on the inner face of the breakwater. They use the mass of the caisson and the fill within it to resist the overturning forces applied by waves hitting them. They are relatively expensive to construct in shallow water, but in deeper sites they can offer a significant saving over revetment breakwaters.
Rubble mound breakwaters use the voids in the structure to dissipate the wave energy. Rock or concrete armour units on the outside of the structure absorb most of the energy, while gravels or sands are used to prevent the wave energy continuing through the breakwater core. The slopes of the revetment are typically between 1:1 and 1:2, depending upon the materials used. In shallow water revetment breakwaters are usually relatively cheap, but as water depth increases, the material requirements, and hence costs, increase significantly.
Caisson breakwaters typically have vertical sides and are usually used where it is desirable to berth one or more vessels on the inner face of the breakwater. They use the mass of the caisson and the fill within it to resist the overturning forces applied by waves hitting them. They are relatively expensive to construct in shallow water, but in deeper sites they can offer a significant saving over revetment breakwaters.
Rubble mound breakwaters use the voids in the structure to dissipate the wave energy. Rock or concrete armour units on the outside of the structure absorb most of the energy, while gravels or sands are used to prevent the wave energy continuing through the breakwater core. The slopes of the revetment are typically between 1:1 and 1:2, depending upon the materials used. In shallow water revetment breakwaters are usually relatively cheap, but as water depth increases, the material requirements, and hence costs, increase significantly.
Credits:
http://en.wikipedia.org/wiki/Breakwater_(structure)
No comments:
Post a Comment